ISCAR is introducing a new pocket adapter (pocket size reducer) to enable clamping smaller size (FLASH-TURN) inserts into the most popular ISO toolholders and, in addition, LOGIQ 4 TURN and DOVE IQ TURN inserts.
The competitive ISOTURN market requires ISCAR to seek constantly new innovative solutions while providing conservative customers the confidence to continue using existing ISO products. To fulfill these needs, ISCAR has developed a new combination system that enables clamping small size negative inserts into standard ISO holders (both ISCAR and competitors) with the use of a simple and economic kit.
Take a standard ISO tool, replace the seat and the lever with the ones provided in the kit, and you obtain a tool that can clamp proprietary inserts such as FLASH-TURN, LOGIQ4TURN and DOVEIQTURN.
ISCAR continues to develop the ISOTURN line by adding new accessories to fit standard smaller ISO turn inserts such as CNMG 09..WNMG 06..SNMG 09… and LOGIQ CXMG 09.. into standard holders for the CNMG 12.., WNMG 08.. and SNMG 12… inserts.
In order to avoid confusion and simplify assembly, all accessories have been divided into separate sets for the indicated geometry.
The following tools can accomodate the following set combinations:
Toolholder
Set Designation
Item No.
Pocket Size Reducer
From
To
User Friendly Sets for Simple Assembly
The new sets package
INSERT
AD#-SET
SPRING
SEAT
LEVER
The following test reports show a comparison between combination systems and standard tools
ISCAR
ISCAR
Workpiece Material
AISI 4340
AISI 4340
Operation
Turning
Turning
Insert
WNMG 060408-M3P IC8250
WNMG 060408-M3P IC8250
Cutting speed Vc (m/min)
200
200
Feed rate f (mm/rev)
0.35
0.35
Depth of cut ap (mm)
3
3
Tool
PWLNL 2525M-06X
PCLNL 2525M-12 with adapter
Tool life (min)
18
18
DISPLACEMENT TEST
Application: Interrupted Material: AISI 1045 ap =3 mm f =0.3 mm/rev Vc =200 m/min
Application: Continuous Material: AISI 4340 ap =3 mm f =0.35 mm/rev Vc =200 m/min