Skip to main content

TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X
Nuestro sitio web utiliza cookies y otras tecnologías para garantizar que obtenga la mejor experiencia de navegación. Puede cambiar la configuración de las cookies en cualquier momento.

Obtenga más información sobre

Find out more on ¿Cómo utilizamos las Cookies?.

Drilling Inserts Wear Problems and Solutions

SOLID CARBIDE
DRILLING - INDEXABLE HEAD
DRILLING - INDEXABLE INSERTS


Type of Wear
    • ×
      Flank Wear
      Flank Wear
      Cause
      • High cutting speed
      • Low wear resistance carbide grade

      Remedy
      • Check that the correct geometry is used
      • Increase coolant pressure
      • Change to harder grade
      • Increase oil concentration percentage
      • Reduce cutting speed.*** increase feed
    • ×
      Crater Wear
      Crater Wear
      Cause
      • Excessive cutting temperatures and pressures on the top of the insert

      Remedy
      • Reduce cutting feed
      • Check that the correct geometry is used
    • ×
      Plastic Deformation
      Plastic Deformation
      Cause
      • Cutting temperature is too high

      Remedy
      • Check cutting parameters
      • Reduce cutting feed
      • Increase coolant pressure/volume
      • Use harder grade
      • Check that the correct geometry is used
    • ×
      Thermal Cracking
      Thermal Cracking
      Cause
      • Excessive variations in surface temperature, intermittent machining, or variations in coolant supply

      Remedy
      • Increase coolant pressure/volume
      • Increase oll concentration percentage
    • ×
      Corner Fracture
      Corner Fracture
      Cause
      • Caused by excessive insert wear before indexing the insert
      • The grade and geometry could be too weak for the applications
      • Excessive load on the insert
      • Built-up edge has been formed on the insert

      Remedy
      • Check radial runout
      • Reduce feed rate increase the speed
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
    • ×
      Built-up Edge
      Built-up Edge
      Cause
      • Cutting zone temperature is too low
      • Negative cutting geometry
      • Machining of very sticky materials such as low-carbon steel, stainless steels, and aluminum

      Remedy
      • Increase the feed
      • Increase cutting speed
      • Increase coolant pressure
      • Check oil percentage in the coolant fluid
    • ×
      Edge Chipping
      Edge Chipping
      Cause
      • Low wear resistance carbide grade
      • Built-up edge has been formed
      • Insufficient cutting fluid

      Remedy
      • Reduce feed rate
      • Increase cutting speed
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
      • Change to different geometry
      • Check tool and part clamping rigidity
    • ×
      Chisel Chipping
      Chisel Chipping
      Cause
      • Chisel runout is too big
      • Combine high feed & low speed

      Remedy
      • Reduce feed rate and increase the cutting speed
      • Check that chisel misalignment does not exceed 0.02mm
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
    • ×
      Corner Chipping
      Corner Chipping
      Cause
      • Radial runout is too big
      • Insufficient cutting fluid

      Remedy
      • Check radial runout
      • Reduce feed rate increase the speed
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
    • ×
      Land Wear
      Land Wear
      Cause
      • Cutting speed too high
      • Low wear resistance carbide grade
      • Radial runout is too big

      Remedy
      • Check that the correct geometry is used
      • Check that T.I.R runout does not exceed 0.02mm
      • Reduce cutting speed
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
      • Check and improve tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the tool body
    • ×
      Flank Wear
      Flank Wear
      Cause
      • High cutting speed
      • Low wear resistance carbide grade

      Remedy
      • Check that the correct geometry is used
      • Increase coolant pressure
      • Change to harder grade
      • Increase oil concentration percentage
      • Reduce cutting speed.*** increase feed
    • ×
      Crater Wear
      Crater Wear
      Cause
      • Excessive cutting temperatures and pressures on the top of the insert.

      Remedy

      • Reduce cutting feed
      • Check that the correct geometry is used
    • ×
      Plastic Deformation
      Plastic Deformation
      Cause
      • Cutting temperature is too high

      Remedy
      • Check cutting parameters
      • Reduce cutting feed
      • Increase coolant pressure/volume
      • Use harder grade
      • Check that the correct geometry is used
    • ×
      Thermal Cracking
      Thermal Cracking
      Cause
      • Excessive variations in surface temperature, intermittent machining, or variations in coolant supply

      Remedy
      • Increase coolant pressure/volume
      • Increase oll concentration percentage
    • ×
      Corner Fracture
      Corner Fracture
      Cause
      • Caused by excessive insert wear before indexing the insert
      • The grade and geometry could be too weak for the applications
      • Excessive load on the insert
      • Built-up edge has been formed on the insert

      Remedy
      • Check radial runout
      • Reduce feed rate increase the speed
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
    • ×
      Built-up Edge
      Built-up Edge
      Cause
      • Cutting zone temperature is too low
      • Negative cutting geometry
      • Machining of very sticky materials such as low-carbon steel, stainless steels, and aluminum

      Remedy
      • Increase the feed
      • Increase cutting speed
      • Increase coolant pressure
      • Check oil percentage in the coolant fluid
    • ×
      Edge chipping
      Edge chipping
      Cause
      • Low wear resistance carbide grade
      • Built-up edge has been formed
      • Insufficient cutting fluid

      Remedy
      • Reduce feed rate
      • Increase the speed
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
      • Change to different geometry
      • Check tool and part clamping rigidity
    • ×
      Chisel Chipping
      Chisel Chipping
      Cause
      • Chisel runout is too big
      • Combine high feed & low speed

      Remedy
      • Reduce feed rate and increase the cutting speed
      • Check that chisel misalignment does not exceed 0.02mm
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
    • ×
      Land Wear
      Land Wear
      Cause
      • Cutting speed too high
      • Low wear resistance carbide grade
      • Radial runout is too big

      Remedy
      • Check that the correct geometry is used
      • Check that T.I.R runout does not exceed 0.02mm
      • Reduce cutting speed
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
      • Check and improve tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the tool body
    • ×
      Corner Chipping
      Corner Chipping
      Cause
      • Radial runout is too big
      • Insufficient cutting fluid

      Remedy
      • Check radial runout
      • Reduce feed rate increase the speed
      • Check tool and part clamping rigidity
      • Check if pocket gripping force is too low, replace the holder
      • Increase coolant pressure
      • Improve jet direction in case of external coolant supply
    • ×
      Flank Wear
      Flank Wear
      Cause
      • High cutting speed
      • Low wear resistance carbide grade

      Remedy
      • Reduce cutting speed
      • Increase coolant pressure/volume
      • Choose better wear resistance grade
      • Increase oil concentration percentage
    • ×
      Crater Wear
      Crater Wear
      Cause
      • Excessive cutting temperatures and pressures on the top of the insert

      Remedy
      outer insert:
      • Reduce cutting speed
      • Choose better wear resistance grade
      • Change to different chipbreaker

      inner insert:
      • Reduce feed rate
      • Change to different chipbreaker
    • ×
      Plastic Deformation
      Plastic Deformation
      Cause
      • Cutting temperature is too high

      Remedy
      • Reduce feed rate
      • Choose better wear resistance grade
      • Increase coolant pressure/volume
      • Choose a different chipbreaker
    • ×
      Thermal Cracking
      Thermal Cracking
      Cause
      • Excessive variations in surface temperature, intermittent machining, or variations in coolant supply

      Remedy
      • Use tougher grade
      • Increase coolant pressure/volume
    • ×
      Edge Fracture
      Edge Fracture
      Cause
      • Caused by excessive insert wear before indexing the insert
      • The grade and geometry could be too weak for the applications
      • Excessive load on the insert
      • Built-up edge has been formed on the insert

      Remedy
      • Use tougher grade
      • Reduce feed rate
      • Increase coolant pressure/volume
      • Change to different chipbreaker
    • ×
      Built-up Edge
      Built-up Edge
      Cause
      • Cutting zone temperature is too low
      • Negative cutting geometry
      • Machining of very sticky materials such as low-carbon steel, stainless steels, and aluminum

      Remedy
      • Increase cutting speed
      • Change to different chipbreaker
      • Reduce feed rate
      • Increase coolant pressure/volume
    • ×
      Chipping
      Chipping
      Cause
      • Low wear resistance carbide grade
      • Built-up edge has been formed
      • Insufficient cutting fluid

      Remedy
      • Choose tougher grade
      • Reduce feed
      • Increase coolant pressure/volume
      • Change to different chipbreaker